What Correx Boards Are Used For
Correx boards are fluted polypropylene sign boards, which makes them light, rigid and easy to handle. They are often used for short term and medium term signage where you need clear messaging without the weight or cost of a more permanent board. For West Rand businesses, that usually means election material, event directionals, site boards, special offers, estate notices and temporary branding on vacant land or building sites.
Because the board is light, it can be fitted to poles, fences, walls and stands with less strain on the fixing points. That matters on dusty sites in Randfontein or in windy open areas around Westonaria and Mogale City where heavier boards can need stronger frames. Correx is also a practical option when you need several signs printed at once and delivered quickly for different entrances, streets or traffic points.
It is not meant for a long life outdoors in full sun and weather. If you want something that must stay up for many months or years, we can guide you to the better board type for that job. For a campaign, launch, event or temporary site message, correx remains one of the simplest and most cost effective choices.
Sizes, Thicknesses And Print Options
We print correx boards to standard sizes as well as custom cut sizes, depending on where the sign needs to go. Common sizes include A4, A3, A2, A1, A0 and custom panels for fences, gates and site entrances. For directional signs and election notices, smaller sizes work well. For roadside visibility or estate notices, larger panels are better.
Typical thickness options are 3 mm and 5 mm. A 3 mm board is suitable for indoor use, short term outdoor notices and lighter display work. A 5 mm board gives a firmer feel and is usually preferred when the board will be cable tied to fencing or mounted outdoors for longer periods. On exposed corners around Krugersdorp or Roodepoort, the thicker board is often the safer choice.
We can print one side or both sides, depending on how the board will be seen. Double sided printing is useful for street edges, driveways and entrances where people approach from both directions. We also handle custom artwork for logos, arrows, numbering, election messaging and simple brand layouts. If your file is not print ready, we can sort out redraws, proofing updates and layout adjustments before printing.
- Available in standard and custom sizes
- 3 mm and 5 mm thickness options
- Single sided or double sided print
- Matte finish commonly used for readable text
- Cut to fit poles, fences, gates or frames
Best Places To Use Correx Boards
Correx boards suit places where signs need to be visible, easy to replace and quick to install. They are common at election points, community halls, school events, sports days, small exhibitions and temporary business promotions. In the West Rand, they also work well for estate entrances, roadside notices, tuckshop promotions, church events and temporary site marking.
For construction and property work, correx is handy for vacancy boards, safety notices, access instructions and branding on short term projects. It can be fixed to a fence line or temporary barrier and removed once the job changes. If your team works across multiple sites in Mogale City or Westonaria, the low weight helps when boards need to move from one location to another without damaging the material.
It also works well for load-shedding notices, parking directions and limited time sales where the message changes often. Because the board is affordable and quick to produce, many businesses use it for short campaigns and seasonal notices rather than paying for a heavier long life board when they do not need one.
- Elections and political outreach
- Events, markets and school functions
- Temporary site branding and safety notices
- Estate entrances and directional signs
- Promotions, specials and short term campaigns
Mounting, Fixing And Power Needs
Correx boards do not need power or gas for use on site. The only power involved is during printing and finishing at our Randfontein CBD base. Once the boards are made, they are ready to install with simple hardware. Most jobs are fixed with cable ties, screws and washers, double sided tape, frame clips or adhesive pads depending on the surface and wind exposure.
On fence lines or temporary barriers, cable ties are usually the quickest option. For walls and timber panels, screws with washers help spread the pressure so the board does not tear at the fixing point. If the board is going onto a smooth surface, strong outdoor tape or adhesive may work, but the surface must be clean and dry. On coastal or humid days, moisture and dust can reduce grip so it helps to prepare the surface properly.
For larger boards, especially where there is wind exposure, we recommend planning the fixing points before print. If the board is too large for the available support, it may bow or flap. That is common on open stands or street-facing fences. In those cases, we can advise on size, thickness and the best way to secure the board so it stays tidy and readable.
- No power or gas needed for installation
- Can be fixed with cable ties, screws, tape or clips
- Surface should be clean and dry before mounting
- Stronger fixing needed for windy or open sites
- Large boards may need extra support points
How To Care For Correx Boards
Correx boards are simple to care for, but they still need sensible handling. Keep them flat when stored, away from heavy objects that can bend the sheet. If a board is placed against a wall or stacked badly in the back of a bakkie, it can pick up a curve. A clean, dry storage area is best, especially during humid weather or after rain.
For cleaning, use a soft cloth with mild soapy water. Avoid harsh thinners, abrasive pads or pressure washing too close to the surface. If a board is used outdoors, dust and road grime can build up quickly near busy roads in Randfontein or Roodepoort, so a quick wipe now and again helps the print stay readable. If the board is on a site for a longer period, check the fixings after strong wind or heavy rain.
When a sign is no longer needed, remove it cleanly rather than pulling it off in one rough motion. That helps the board remain usable for a future short term job if the print is still relevant. In many cases, it is more practical to replace the board once the message has done its work rather than trying to push it far beyond its proper lifespan.
What To Check Before You Order
The most common problems with signage come from missing details at ordering stage. Before you send your correx board brief, check the exact size, quantity, finishing and installation method. Think about where the board will be placed, how far people will view it from and whether it must be seen from one side or both sides. If the board is for a street or open site, readibility is more important than cramming in extra wording.
It also helps to confirm the final artwork elements early. Logos should be clear, text should be checked for spelling, and contact details must be current. If your team is using the board for an event or election date, make sure the dates and times are final before print. A last minute change can delay the job and add extra cost.
Where relevant, check with your site manager or municipality about placement rules, especially for roadside or public facing boards. Some areas have rules about where temporary signage may be fixed and how long it may remain up. If you need boards for a campaign across several areas such as Greenhills, Toekomsrus or Mohlakeng, we can help keep the artwork consistent while changing the wording per location.
- Confirm size, quantity and single or double sided print
- Check viewing distance and where the board will be fixed
- Approve the final wording and spelling before production
- Plan for local placement rules where needed
- Ask for artwork help if you only have a rough layout
Ordering From Our Randfontein Team
@Print works with businesses across Randfontein, Krugersdorp, Westonaria, Mogale City and Roodepoort on quick-turnaround digital print jobs. Our team handles the artwork, print, finishing and collection process from our Randfontein CBD base, so you can keep the job moving without chasing too many people. If you need the boards ready for a launch, election weekend or site handover, tell us the deadline up front so we can advise on turnaround.
You can reach us through the enquiry form on our contact page. If you need design help, we can assist with banner artwork, sticker design, poster design, proofing updates and print ready artwork for your correx boards. That makes it easier to keep one clean visual style across several boards, even if each site has a different message. It is a straightforward process and it suits businesses that need practical signage without delays.
Whether you are putting up a few boards in the CBD or a run of signs across the West Rand, correx is one of the quickest ways to get your message on site and seen. For many short term jobs, that is exactly what is needed.
Key facts
| Material | Fluted polypropylene correx board |
|---|---|
| Thickness | 3 mm or 5 mm |
| Single sided or double sided digital print | |
| Sizes | A4, A3, A2, A1, A0 and custom cuts |
| Use | Temporary to medium term indoor and outdoor signage |
| Mounting | Cable ties, screws, washers, tape or clips |
